Mitsubishi Electric Ecodan vs Viessmann Vitocal: Which Air Source Heat Pump Is Better? (2026)
Quick Verdict
Mitsubishi Electric Ecodan is the more efficient choice on its MCS-certified figures, with lower estimated running costs.
Side-by-Side Comparison
| Feature | Mitsubishi Electric Ecodan | Viessmann Vitocal |
|---|---|---|
| Installed price (before grant) | £9,000 - £14,000Lower | £10,000 - £16,000 |
| After £7,500 grant (illustrative, England and Wales) | £1,500 - £6,500 | £2,500 - £8,500 |
| SCOP at 35°C (MCS) | 4.62Higher | 4.2 |
| SCOP at 55°C (MCS) | 3.51Higher | 3.46 |
| Largest size | 10kWLarger homes | 8kW |
| Standard warranty | 3 yearsLonger | 2 years |
| Longest warranty (conditions apply) | 7 years | 7 years |
| Sound power (declared) | 54 dB(A) | 51 dB(A)Lower |
| Annual running cost (est., 45°C flow) | ~£650/yrLower | ~£685/yr |
| Refrigerant and max flow | R290, up to 75°C flowHotter flow for radiators | R290, up to 70°C flow |
| Country | Japan / UK | Germany |
| UK brand | Yes | No |
| Best for | Homes keeping their existing radiators, from a UK-built range | Smaller or new-build homes wanting a quiet R290 unit |
Specifications and pricing are indicative for the UK market as at June 2026. Post-grant figures illustrate the £7,500 Boiler Upgrade Scheme in England and Wales (Scotland uses the Home Energy Scotland grant and loan; Northern Ireland has no equivalent). Running costs assume ~10,000 kWh of heat a year at 26.32p/kWh (Ofgem cap average, October to December 2026; changes quarterly). Confirm current models and exact pricing with your MCS-certified installer.
Model by Model, Size for Size
Each Mitsubishi Electric Ecodan model against the nearest Viessmann Vitocal size. Better figure in green.
| 8.5 kW vs 8 kW | Ecodan R290 8.5kWR290 · PUZ-WZ85VAA | Vitocal 150-A 08R290 · AWO-M-E-AC-AF 151.A08 |
|---|---|---|
| SCOP at 35°C (MCS) | 4.47 | 4.20 |
| SCOP at 55°C (MCS) | 3.51 | 3.46 |
| Sound power (declared) | 54 dB(A) | 51 dB(A) |
| Maximum flow temperature | 75°C | 70°C |
| Running cost (est.) | ~£660/yr | ~£685/yr |
| Installed price from (before grant) | £9,000 | £10,000 |
| Outdoor unit weight | 103 kg | 162 kg |
| Suits | 3-4 bed semi or detached | smaller or new-build homes |
Sizes are the makers' labels; where a label is not the rated output, the brand page says what is. Prices are PumpSwap's indicative estimates. Running costs use the same basis as the table above.
Price Comparison
Mitsubishi Electric Ecodan starts from £9,000 installed before any support (indicative, June 2026), while Viessmann Vitocal starts from £10,000. That is a difference of roughly £1,000 at the entry level. Mitsubishi Electric Ecodan is the more budget-friendly option upfront, though Viessmann Vitocal may claw some of that back through running costs over time. Both are installed prices in GBP with 0% VAT (until 31 March 2027) already applied. In England and Wales the £7,500 Boiler Upgrade Scheme grant comes off both equally, so the pre-grant difference carries straight through: illustratively £1,500 - £6,500 for Mitsubishi Electric Ecodan and £2,500 - £8,500 for Viessmann Vitocal out of pocket. Your MCS-certified installer claims the grant for you.
Efficiency Comparison
SCOP (seasonal coefficient of performance) is the key efficiency measure for a heating heat pump: the kilowatt-hours of heat you get per kilowatt-hour of electricity across a whole heating season. The figures here are MCS-certified, at 35°C flow (underfloor heating or large radiators) and 55°C (hotter radiators). Mitsubishi Electric Ecodan is certified at 4.62 at 35°C and 3.51 at 55°C, while Viessmann Vitocal is certified at 4.2 and 3.46. On our estimates at a 45°C design flow temperature, the Mitsubishi Electric Ecodan costs about £35 a year less to run at Ofgem cap electricity prices, or approximately £350 over ten years. Real-world efficiency depends heavily on system design and flow temperature, which is what the MCS heat loss survey is for.
Warranty Comparison
Mitsubishi Electric Ecodan: 3 years as standard; 5 years through an Accredited Ecodan Installer and 7 through a Heating Business Solutions Partner. Register within 30 days of commissioning or cover drops to 12 months. Cylinders get 3 years at every tier. Viessmann Vitocal: 2 years as standard; 7 years for £360 if a Viessmann-trained installer registers it within 30 days, with a service every 12 months. On standard terms, the Mitsubishi Electric Ecodan has the longer cover; the longer terms on either side depend on registration, servicing and the installer. Workmanship cover for the installation itself comes separately from your installer and should be in writing.
Noise Comparison
Noise matters in UK homes because the outdoor unit often sits close to a neighbour's boundary or a bedroom window. The like-for-like figure is the maker's declared sound power: the noise the unit itself emits. Mitsubishi Electric Ecodan: 54 dB(A). Viessmann Vitocal: 51 dB(A). On paper the Viessmann Vitocal is quieter by 3 dB(A). What a neighbour hears is much lower and falls with distance, and permitted development rules require the installation to meet the MCS noise standard at their window, so siting matters as much as the unit.
Cold-Weather and Retrofit Suitability
Two things decide how well a unit suits an older UK home: cold-weather output and flow temperature. Mitsubishi Electric Ecodan uses R290 refrigerant (up to 75°C flow), while Viessmann Vitocal uses R290 (up to 70°C flow). The Mitsubishi Electric Ecodan's higher flow temperature helps existing radiators carry the load without a full re-pipe. Modern units hold useful output well below freezing. In the colder parts of the UK (Scotland and northern England in particular), frosty mornings trigger short defrost cycles that trim efficiency, so ask each installer for low-temperature output figures and take the MCS heat loss survey seriously; radiator upsizing is more commonly recommended there so the system can run at efficient flow temperatures.
Pros and Cons
Mitsubishi Electric Ecodan
Pros
- Made in Livingston, Scotland
- R290 range reaches 75°C flow, so existing radiators can often stay
- Quiet Mark certified (R290 8.5, 10 and 12 kW)
- The 8.5, 10 and 12 kW sizes all come in single phase
Cons
- Standard warranty is 3 years; 7 needs a top-tier Mitsubishi installer
- Single-phase 10 and 12 kW units need a dedicated 32 A or 40 A supply
Viessmann Vitocal
Pros
- Natural R290 refrigerant, up to 70°C flow
- Declared sound power of 51 dB(A)
Cons
- Standard warranty is 2 years; 7 costs £360
- MCS-certified SCOP (4.2 at 35°C) is below the maker's own 4.4
- Heavy for its rated output (162 kg)
Which Should You Choose?
Choose Mitsubishi Electric Ecodan if...
- You want a lower upfront cost (from £9,000 vs £10,000 before the grant)
- You want the higher certified efficiency (SCOP 4.62 vs 4.2 at 35°C, MCS)
- You want a longer standard warranty (3 yr (up to 7) vs 2 yr (up to 7))
- You want lower estimated annual running costs (~£650/yr vs ~£685/yr)
- You want a UK brand with local manufacturing or headquarters behind it
- You are keeping existing radiators and want a higher maximum flow temperature (75°C vs 70°C)
Choose Viessmann Vitocal if...
- A lower declared sound power matters to you (51 vs 54 dB(A))
The grant is the same, whichever brand you pick
Every air-to-water unit on this page qualifies for the £7,500 Boiler Upgrade Scheme grant in England and Wales (£9,000 for oil and LPG heated homes until March 2027) when fitted by an MCS-certified installer, who claims it on your behalf so it comes straight off the quote. Scotland uses the Home Energy Scotland grant of up to £7,500 (£9,000 rural and island) plus an optional interest-free loan; Northern Ireland currently has no equivalent scheme. 0% VAT on residential installations applies UK-wide until 31 March 2027. Accurate as at July 2026.
Heat pump guides
- Air source heat pump installation cost in the UK
- The best air source heat pumps in the UK, compared
- The £7,500 Boiler Upgrade Scheme, explained
- Air source heat pumps: costs, grants and brands
- Heat pump grants in London
- Heat pump grants in South East England
- Heat pump grants in South West England
- Heat pump grants in East of England
- Heat pump grants in East Midlands
- Heat pump grants in West Midlands
- Heat pump grants in Yorkshire and the Humber
- Heat pump grants in North West England
- Heat pump grants in North East England
- Heat pump grants in Scotland
- Heat pump grants in Wales
- Heat pump grants in Northern Ireland
Where are you?
See indicative costs and local installers for your area